Ich verzweifle aktuell dabei bei dem Versuch, dafür zu sorgen das meine Zentrale wieder zu einer Internet Verbindung kommt.
Ich habe vor langer Zeit das Pivccu all in one Image auf meinem Raspberry 3b installiert und seit dem auch ständig mit Updates versorgt. Da der kleine aber leider ungünstig für die benötigte Reichweite steht, wollte ich das ganze auf WLAN umrüsten, um einen Zentraleren Platz zu schaffen… scheinbar mit dem Erfolg das ganze zu Schrotten .. ich hoffe hier weiß jemand rat um die pivCCU und den Iobroker wieder in das Netz zu bekommen.
Genutzt hatte ich die Anleitung aus GitHub von Alex.
ifconfig
Code: Alles auswählen
br0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>
mtu 1500
inet192.168.178.1
netmask 255.255.255.0 broadcast 192.168.178.255
inet6 feBO::c098:3Pf:fedB:5461
prefixlen 64
scopeid Ox20<link>
ether fe:f0:38:b8:49:7a
txqueuelen 1000
(Ethernet)
RX packets 18 bytes 3619 (3.5 KiB)
RX errors O
dropped 0
overruns O
frame ©
TX packets 138 bytes 40497 (39.5 KiB)
TX errors O
dropped © overruns ©
carrier O
collisions 0
lo: flags=73<UP, LOOPBACR, RUNNING>
mtu 65536
inet127.0.0.1
netmask 255.0.0.0
inet6 ::1 prefixlen 128
scopeid Ox10<host)
100P
txqueuelen 1000 (Lokale Schleife)
RX packets 2729 bytes 338734 (330.7 KiB)
RX errors 0
dropped ©
overruns O
frame
O
TX packets 2729
bytes 338734 (330.7 KiB)
X errors ©
dropped © overruns Q
carrier O
collisions ©
vethpivccu:flags=4163<UP,BROADCAST,RUNNING,MULTICAST>
mtu 1500
inet6 feBO::fcfO:38ff:feb8:497a prefixlen 64 scopeid Ox20<1ink>
etherfe:f0:38:b8:49:7a
txqueuelen 1000
(Ethernet)
RX packets 18
bytes 3871 (3.7 KiB)
HX errors 0
dropped ©
overruns 0
frame 0
IX packets 87 bytes 26615 (25.9 KiB)
TX errors ©
dropped © overruns ©
carrier O
collisions 0
wlan0: flags=4099<UP,BROADCAST,MULTICAST>
mtu 1500
ether bB:27:eb:9f:2a:07
txgueuelen 1000
(Ethernet)
RX packets O
bytes 0 (0.0 B)
HX errors
O
dropped
O
overruns 0
frame 0
TX packets 0 bytes 0 (0.0 B)
™X errors o
dropped © overruns O
carrier 0
collisions 0
Code: Alles auswählen
auto lo
iface lo inet loopback
auto wlan0
iface wlan0 inet dhcp
wpa-ssid <FRITZ!Box 6660 CABLE>
wpa-psk <xxx>
auto br0
iface br0 inet static
bridge_ports none
bridge_fd 0
address 192.168.178.1
netmask 255.255.255.0
EOT'
Code: Alles auswählen
HOSTNAME=piVCCU3
MODE=MANUAL
CURRENT_IP=192.168.178.43
CURRENT_NETMASK=255.255.255.0
CURRENT_GATEWAY=192.168.178.1
CURRENT_NAMESERVER1=8.8.8.8
CURRENT_NAMESERVER2=8.8.4.4
IP=192.168.178.43
NETMASK=255.255.255.0
GATEWAY=192.168.178.1
NAMESERVER1=8.8.8.8
NAMESERVER2=8.8.4.4
CRYPT=0
EOT'